Nikon F to Sony E adapter thickness
A glassless Nikon F to Sony E adapter must be about 28.5 mm thick to keep a Nikon F lens focusing correctly on a Sony E body. This equals the Nikon F flange focal distance minus the Sony E flange focal distance, both published mount-design constants, reviewed 2026-09-12.
How this is computed
Using the Nikon F flange-to-sensor distance as a one-component train against a backfocus target equal to the Sony E flange focal distance (filter correction off), BackfocusLab's own model reports the spacing gap between them as the required adapter thickness.
- Source mount (lens side)
- Nikon F, 46.5 mm FFD
- Target mount (body side)
- Sony E, 18 mm FFD
- Adapter thickness
- 28.5 mm
This is illustrative arithmetic, not a substitute for the manufacturer's own adapter specification; small machining tolerances exist. A dumb, glassless adapter only forwards the mechanical mount; it makes no claim about autofocus, aperture control, or electronic contacts, and a nominal fit is not a compatibility guarantee. Verify against your camera manufacturer's published specification before ordering.
Open the workbench and enter your own train